ISO/IEC 17025 certification has been awarded to Z6 Commissioning (Z6) by the ANSI-ASQ National Accreditation Board (ANAB/ILAC). This pinnacle of international accreditation requires us to conform to the highest standards in testing procedures available to achieve optimal building envelope efficiency for our clients.
Z6 can now provide our clients with laboratory and field services that are benchmarked against systems and standards to ensure uniformity and integrity of test results. Our clients can rest easy in the knowledge that each year Z6 will undergo an exhaustive external audit of quality control.
Valid to: October 26, 2018
Certificate Number: AT-2090
I. Construction Materials / Mechanical
|Field of Test||Items, Materials or Products Tested||Specific Tests or Properties Measured||Specification, Standard Method, or Technique Used||Key Equipment or Technology*|
|Building Elements||Exterior Windows, Doors, Skylights, Curtain Walls||Water Infiltration||ASTM E 1105, ASTM E331, ASTM E547, AAMA 501||Water Distribution Rack, Centrifugal Blower, Manometer, Wind Generator, Spray Wand|
|Building Elements||Exterior Windows, Doors, Skylights, Curtain Walls||Air Infiltration||ASTM E283, ASTM E783||Centrifugal Blower, Laminar Flow Element, Manometer|
|Building Elements||Exterior Windows, Doors, Skylights, Curtain Walls||Water and Air Infiltration||AAMA 502, AAMA 503||Water Distribution Rack, Centrifugal Blower, Manometer|
|Building Elements||Exterior Windows, Doors, Skylights, Curtain Walls||Deflection / Deglazing||ASTM E330, ASTM E987||Digital Deflection Indicator, Centrifugal Blower|
|Building Elements||Roofing Systems||Uplift Force||ASTM E907, FM Global 1-52||Uplift Chamber, Manometer, Centrifugal Blower|
|Building Elements||Coating Films, Adhesion Bond||Adhesion Strength||ASTM D3359, ASTM D903||Adhesion Test Kit|
|Building Elements||Windows, Sliding Door Assemblies||Forced Entry||ASTM F588, ASTM F842||Forced Entry Test Kit|
|Building Elements||Concrete or Clay Tiles||Wind / Uplift Resistance||ASTM C1568, ASTM D4541, ASTM E2359/E2359M||Construction Load Cell Pull Tester|
|Building Elements||Miscellaneous||Roofing, Window Sealant, Envelope Air Leakage, Foundation Humidity, Cladding Moisture Absorption||ASTM C1521, ASTM D7877, ASTM E1186, ASTM F2170, Rilem Commission 25/PEM test method 1154)||Sealant Test Kit, High & Low Voltage Electronic Detection Units, Centrifugal Blower, Smoke Tracer Unit, Infrared Camera, in situ probes, Rilem Tubes|